Re: stuck engine

Posted by Greenfield on 2021/8/1 5:33:19
Wat -- I would try taking a big wood dowel rod, put it down the problem cylinders, and lightly tap around the edges of the piston to try to create some micro-fissures in the corrosion. If that doesn't seem to move the ball, then I would clean it all out real good and dump Evaporust down the cylinders as a last resort prior to tearing it all apart.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=235619