Re: 1940 Turn Signal Wiring Diagram
Posted by Packard Don On 2021/10/13 18:31:27
Quote:
On a ‘40 the parking light are dual filament, so just attach to the second filament. For the taillight, you have to add a second, signal-dedicated socket.
Adding a second socket is not necessary but you do have to add a separate wire so that the left and right brake lights each have their own. Once done, the switch connects through the brake light switch so when you press the pedal, both will illuminate as usual but when the signal is on, one will get its power through the flasher.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=237747