Re: Got my first flat on the '29 last night - anybody got experience changing the tubes?

Posted by 1929PackardGuy On 2021/10/8 8:45:41

[quote]
Tim Cole wrote:
With wire wheels you can put straps through the spokes as safety against the snap ring blowing out. As well, the tire should be lined with talcum powder, and inflated and deflated to unwind the tube. As mentioned, inflate the tire facing away from you against the wall. When you are done let the tire fall flat on the floor face down and let sit at least a half an hour. Mount the wheel and remove the straps. Inspect the rim for any cracking on the snap ring bead prior to installing the tire. I used the straps whenever feasible. They don't have to be tight, they are there to keep the ring from flying across the room.

Exactly the way I got told to do it by a VERY experienced antique car guy who shall remain nameless - ten points!

He said just put some tie-down straps on it and don't worry about it. Has done it for decades without incident.

Can't lay this wheel face down as the center extends past the rim, but, not too worried about it now. Have to wait for the tube to get here, but, I think I can get this now!

Thanks much, I'll post pics of the lazy way to do this provided it works!