Re: 1940 Backup Light Switch

Posted by HH56 on 2021/10/13 13:37:06
On Clipper bodies and following years, it is at the base of the steering column just above the steering box on a bracket attached using the hardware holding the bottom support for the shift tube. 40-42 conventional bodies may be the same. If so, look for a rectangular box with a plunger that is pushed in by the bottom R-1 shift lever when reverse is selected.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=237726