Re: 1937 120 Center Dash Panel
Posted by Pack120c On 2021/10/19 18:48:08
Thanks Howard. Your wealth of knowledge never ceases to amaze me. We may have to rig up something as I don't see any studs in the collection of old hardware from disassembly. The next question is how to attach studs to the back of the cast bright work?
I found another photo on the internet from a restoration blog about 10 years ago. There is no protrusion in the back or evidence of speednuts. The holes on the corners and in the center appear to be flush with the metal dash with some sort of tacking. Hmmm.....
Attach file:
1153_4f0506a971515.jpg (31.90 KB)
I found another photo on the internet from a restoration blog about 10 years ago. There is no protrusion in the back or evidence of speednuts. The holes on the corners and in the center appear to be flush with the metal dash with some sort of tacking. Hmmm.....
Attach file:
1153_4f0506a971515.jpg (31.90 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=237925