Re: Paint work
Posted by 29tons On 2021/11/23 19:13:10
Quote:
GaryinSC wrote:
I would not switch to non-sanding on those spots, stay with the base primer you already used, or re-spray the car with non-sanding. Mixing primers under finished paint is not a good idea, especially with the overall costs for finish paint these days.
I guess I do not understand are you saying strip off all the old high build primer off and respray with non sanding primer. That seems like a ton of work. I am concerned that if i use the high build primer to cover the bare spots I may sand through again here and there because there are so many angles the tech sheet says the high build primer must be sanded before the top coat can be applied. And you cant put paint over bare metal thats what the tech sheet says
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=238935