Re: 1936 120 running board rubber removal

Posted by Greenfield On 2022/6/12 6:01:40
Perhaps try some Purple Power and see if it dissolves or soften the rubber or glue. What I would do is leave a rag soaked in PP on the rubber for a day or so and see if it produces a reaction, either turning the rubber to a gelatinous muck that can be easily scraped off or loosening the glue so the rubber can be pulled off less a hammer and chisel. If it works, fashion a way to soak the boards directly in it. Underlying metal won't be affected. Purple Power works so good as a stripper/degreaser that it'll probably be illegal next year. Be sure to use gloves, cause PP isn't kind on skin.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=244869