Re: Head is off on 1931 Packard with poor compression
Posted by GaryinSC On 2022/7/17 12:09:41
Do you have any documentation on the cam rollers being replaced ? Mine were broken with 57,000 miles. See attached photo, Since you have the lifters out, removing the cam levers is not too bad of a job. Replacing these made a world of difference in the valve noise.
Attach file:
Roller with Broken Bushings.jpg (348.94 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=246089