Re: 1934 eight spark plug
Posted by Owen_Dyneto On 2022/7/28 20:29:51
I've been using the Autolite 303 in my 1934 Eight for many, many years. An excellent plug for this engine with the added plus that the nipple unthreads so you can use correct knurled thumb screw connectors if you are authenticity-minded. I've also used the Autolite 308 with good results but they won't accept the wire end eyelet and knurled thumb wheel connectors.
Sadly, I'm told these plugs no longer come with proper black oxide shells, so you can either put up with the cadmium plate appearance, or chemically blacken or paint them.
The wire looks white in this photo but it is the correct gray.
Attach file:
34 hood welt and plug_0049 cr sm.jpg (144.32 KB)
Sadly, I'm told these plugs no longer come with proper black oxide shells, so you can either put up with the cadmium plate appearance, or chemically blacken or paint them.
The wire looks white in this photo but it is the correct gray.
Attach file:
34 hood welt and plug_0049 cr sm.jpg (144.32 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=246542