Re: Windlace installation
Posted by Joe Santana On 2023/2/2 18:07:40
Mine is a '40 160.
I am redoing my entire dash and wiring out of the car. My kick panel is out because I'm mounting my relay and distribution block in a box on the kick panel. With my dash and kick panel out, you can see how the outside strip of windlace is glued against the metal and under the kick panel and holes punched for the kick panel retaining clips through the inside and outside edges of the windlace..
The leather towards the bottom corner of the window wraps around the dash metal covering the piece that sticks up, (in the circle) and following the curve of it.
Attach file:
CoveredCornerDash.jpg (214.78 KB)
40Windlace.jpg (259.64 KB)
I am redoing my entire dash and wiring out of the car. My kick panel is out because I'm mounting my relay and distribution block in a box on the kick panel. With my dash and kick panel out, you can see how the outside strip of windlace is glued against the metal and under the kick panel and holes punched for the kick panel retaining clips through the inside and outside edges of the windlace..
The leather towards the bottom corner of the window wraps around the dash metal covering the piece that sticks up, (in the circle) and following the curve of it.
Attach file:
CoveredCornerDash.jpg (214.78 KB)
40Windlace.jpg (259.64 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=253436