Re: getting the horn button off

Posted by flackmaster On 2023/7/7 16:57:31

It is most certainly a push and turn, about 1". Two tips first, don't be afraid to spray some pb blaster, brakleen, wd40 or other cancer causing substance between the bakelite button and the chrome cup just don't get any on the button itself, or clean it off, as it helps to spray a little contact adhesive(3m 77 or such or some rubber cement) on the button and your fingers to gain the necessary traction to push and twist the button.

And the wire goes all the way down the steering column, and exits to the relay at the bottom of the steering box.

picture of the button and the cup if that may help visualize.

Attach file:

---

  20230707_174631.jpg (185.67 KB)