Re: Finishing what the boys started back in the 50's

Posted by Lgace On 2023/9/3 12:46:25

Peter Packard, did you use the installation instructions for the 1601 that pushed the motor and trans back?

I'm restoring my '38, 1601 that had a '49, 288 shoved in it. From what I can tell, whom ever did the modification, followed more of the instructions for the 2001 or 2301, but did not use the engine support frame brackets form the kit, they opted to cut the front frame holes where the original mount went forward the 3/4" (not sure what spacers were used). They cut the radiator cradle and modified the radiator mounting so it could be pushed forward. They also cut the upper and lower radiator splashers 3/4".

The radiator cradle seems to be modified more than what is stated in step 11 of the instructions?

I'd be interested if anyone can provide the "template" that marked off-fender flanges (what are these?) on both sides. The inner fender splashers of mine have been cut and bent, the instructions does not mention that these get modified.