Re: 1925 Packard information
Posted by Bob Supina On 2009/5/11 7:20:50
Good Morning from Texas...
Vic, I am the PAC Roster Keeper for the 326 series.
<P>
I would certainly appreciate the following information.
<P>
Serial number from data plate (Inside firewall above steering column)............
<P>
engine #..........
<P>
frame number (stamped on from near steering box)
<P>
If you have a sedan, there should be a plate on the floor under the carpet,near right rear door. This would have the body style number and production.
<P>
There might also be a number stamped into the wood.
<P>
P.S. attached is a pic of my 'twin-sixes'....actually one is an early 326 sedan and the other is a late 326 sedan.
Attach file:
(32.13 KB)
(53.14 KB)
Vic, I am the PAC Roster Keeper for the 326 series.
<P>
I would certainly appreciate the following information.
<P>
Serial number from data plate (Inside firewall above steering column)............
<P>
engine #..........
<P>
frame number (stamped on from near steering box)
<P>
If you have a sedan, there should be a plate on the floor under the carpet,near right rear door. This would have the body style number and production.
<P>
There might also be a number stamped into the wood.
<P>
P.S. attached is a pic of my 'twin-sixes'....actually one is an early 326 sedan and the other is a late 326 sedan.
Attach file:
(32.13 KB)
(53.14 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=28287