Re: Butterfly Hood Support
Posted by Larry Reber On 2023/8/12 16:35:55
I used a piece of flat shelving brace, rolled the end and turned up the other end.
I drilled 2 holes and added some # 6 screws and nuts to clamp them in place .
Actually used vice grip to compress the opening to insert screws so I did not depend on the screws to compress the metal.
Then added some sheet rubber for the hood to sit on.
Attach file:
71246483032__8AC08BBA-D4C8-4DE7-BE0D-F012C290A2E5.jpeg (153.38 KB)
I drilled 2 holes and added some # 6 screws and nuts to clamp them in place .
Actually used vice grip to compress the opening to insert screws so I did not depend on the screws to compress the metal.
Then added some sheet rubber for the hood to sit on.
Attach file:
71246483032__8AC08BBA-D4C8-4DE7-BE0D-F012C290A2E5.jpeg (153.38 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=260301