Brake question
Posted by Don B On 2023/8/19 12:11:45
I ordered and received a deluxe brake overhaul kit from Kanter for my 1937 138CD limo.
For the wheel cylinders, I received two (2) WC4803 and two (2) WC4804.
Looking these up, I see that both models are 1 in bore, which is correct for my car. (the 138CD is different than the 120C which uses 1-1/16in in the front and 15/16 in in the rear).
But, what is the difference between the two cylinder model numbers. Which is for the front and which is for the rear?
Attach file:
IMG_8032.jpeg (157.92 KB)
For the wheel cylinders, I received two (2) WC4803 and two (2) WC4804.
Looking these up, I see that both models are 1 in bore, which is correct for my car. (the 138CD is different than the 120C which uses 1-1/16in in the front and 15/16 in in the rear).
But, what is the difference between the two cylinder model numbers. Which is for the front and which is for the rear?
Attach file:
IMG_8032.jpeg (157.92 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=260557