Re: Brake question

Posted by Don B On 2023/8/20 9:25:23

Okay…I figured out the problem….

For my car, there are four different model numbers for the wheel cylinder. Each wheel is different.

First, you have left and right to account for the line entry angle.

Then, the front use 7/16-20 threads for the line entry for the rubber hose lines.

The rear uses 7/16-24 for the hard lines.

Kanter didn’t account for this, so I have the wrong wheel cylinders for the rear. I either need to get the correct wheel cylinders or find 7/16-20 to 7/16-24 adapters.