Re: Oil filter lines

Posted by fourbybud On 2023/9/17 10:04:41

I have attached a few pics of my setup. My return goes into a fitting on the back of the filler tube. There is a tee at the bottom supply line with a feed to the filter and a small line to the port on the block just above. I feel like I should leave the small line and tee in place and plumb everything from there. But if the pressure is coming from the bottom port, should that not be the top/supply at the filter and not the bottom. Seems like the oil should flow from outside in on the cartridge, but a may be wrong.

Attach file:

---

  20230917_105445.jpg (381.34 KB)