Re: Oiling issues and hole in air filter lid.

Posted by fourbybud On 2023/9/22 18:22:06

Well, made a restriction by using a brass compression. Filled it with solder and drilled it out to 5/64. Helped immensely but still have a slight splashing problem in the filler tube and saturating the breather to the point of leaking. What's everyone's thoughts on stepping down to 1/16 hole size? Or I was thinking about putting a brass freeze plug in the filler tube with some smaller holes to control the splashing yet still letting the engine breath?

Attach file:

---

  20230922_143009.jpg (0.00 KB)