Re: Electromatic clutch operation

Posted by Jim Kavanagh On 2009/8/4 19:31:40

This worked great! Once I isolated the switch, the test worked as it should and the light only burned in first and reverse, extinguishing in neutral.
I will work through the rest of the tests, making sure to isolate the components as much as possible.

Does the fact that it did NOT work when I had the switch connected to the LR indicate that I have a problem with the 8 terminal relay? It seems that the circuit must be closed somewhere. My understanding of relays is pretty rudimentary, but it looks like the three relays are wired together inside, so I assume that if one of the other switches is bad (closed), it could close the circuit and produce the results I initially had (circuit closed in all positions of the shifter). I'll test the other components separately. If none of them is bad, I assume I may have a problem with the relay itself?

BTW, looking for page 17 of the training manual, which seems to be excluded from the upload. It is at the end of the testing of the electric circuits that I need to perform. Anyone have a scan of that page?

Thanks