Re: Front Wheel Bearing seals
Posted by walkerman On 2010/4/15 19:17:45
SHAFT-- BORE-- WIDTH
NATIONAL 5975 1.75 2.724 .437
NAPA 17145 1.734 2.73 .512
THIS IS C/R
C/R 17617 1.75 2.718 .359
My question is the original #5975 is .437 width. Is it better to be small with the .359 or bigger with the .512
And will the bigger one hit the back plate? What one is better? need a few feed backs.
Thank You
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=51280