Re: 1930 733 Steering Sector Worm Gear and Shaft

Posted by Thomas Wilcox On 2010/9/8 13:44:42

I know much of the history, but not all. The car was originally delivered to Fleigh Motors in Hagerstown, MD in Jan 1930. The fellow that bought it died shortly thereafter, and his widow had the car until her death in the late 50s. I am pretty sure she had a driver, as all the cigarette burns, receipts, lists, notes and coins got lost under the rear seat behind the driver. After her death, it went to a private museum in Hagerstown. I think it was then that it was given a new coat of paint (dark-ish metallic blue). It sat in the museum until the proprietors death in the late eighties. In 1992 it went to a private collector that was going to restore it. He never did anything with the car. In 2004 his neighbor, who had a fleet of 'classic car' taxis, purchased the car with the intent of fixing it up for hire. He ended up doing nothing with it. I then bought it and shipped it to Texas.

From talking with the previous owners, it appears to have been driven very little since the 50s. At some point the Bijur system stopped functioning, probably after it sat in a museum for 30 years without being touched. It was then driven. From bearing damage in the engine to torched spring shackles, nothing was really done to get it ready to drive after sitting. I then compounded the problem by driving it about 10 miles after I got it here.

The sheet metal and frame had essentially no rust. There is evidence of a small accident on the passenger side. It looks like someone backed over something that caught the running board support. The front right fender had a slight crease. No metal needed to be cut out and replaced on the body. All the wood is original and in perfect condition. Frame is completely straight. No evidence of replacement steering components. The king pins were solid and tight.

The 'lubricant' that was removed from the transmission, differential and steering box was like moist tar. The engine oil pan had a good 1/2 to 1" of sludge. All points that were Bijur lubricated showed excessive wear, and the Bijur tank was dry when I decided to check Most of the Bijur lines were seriously clogged with old oil (tar). The shocks were also frozen.

The engine compartment and underside were really really dirty, particularly the right side.

So, a very solid car that suffered greatly from lack of lube. But, truly, no accidental damage that I or my body guy can find besides those mentioned above.

BTW, the transmission was perfect (except bushings and bearings)! Dang they built those solid.

It would take a hell of a lot of force to twist that shaft and break those teeth (if that is what I am seeing). I just don't see any other evidence for that kind of impact.

Oh, and the frame, engine, and data plate and original owner's receipt all agree. The car was in it's original configuration before I started carefully tearing it apart. It even still had it's original optional blinds on all but the front window.

[EDIT]: Also, I really don't think the shaft twisted, as the bore through the shaft for lubrication is completely straight.