Re: engine problem 1940 110
Posted by Thomas Wilcox On 2010/9/27 12:21:01
You may want to do a compression check. If you don't have a compression tester, you can get one fairly inexpensively at places like
Amazon.
Do the check once with cylinders dry, then add a teaspoon of oil to each cylinder before you check again. If any cylinder shows significant improvement, that is the cylinder with ring/piston/cylinder wall problems.
If you have a bad cylinder and compression does not improve with oil then there is probably a valve problem.
Tom
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=60714