Re: 34 starter motor removal

Posted by IrishPackard On 2010/11/18 13:03:11

Hi all,

Having suffered several broken springs on the starter, I am well used to removing it!

All the above info is correct, dont forget to disconnect the battery leads first.

First time the starer was stuck solid so injected some WD40 around and into the bolt hole then got a oil filter remover (an all metal type that tightens up with a thumb screw), attached it to the neck of the starter for more leverage.

Lube the starter well before re-inserting, it can be hard to wriggle it around if you dont.

Regards,

Pat.