Re: Light Eight (900) Rear spring front shackle bolt: how to remove

Posted by Thomas Wilcox On 2011/3/21 10:07:56
OK, getting the cotter pin out was easy. After application of PB Blaster, and jacking up the rear axle to release the pressure on the bolt, the bolt turned easily.

Unfortunately, it is not going to be easy to get the nut to turn separate from the bolt. At minimum it is a two person job. It may also require the manufacturing of a speciality tool.

Thanks tons for your help.

Tom

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=72750