Re: 1929 - 30 restore camshaft journals and bearings with to much waer
Posted by 32model901 On 2011/5/19 18:53:32
2470Packard,
I've attached some info on Packard engine bearing clearances and recommended clearances for engines of the same period.
Also a publication from Clevite gives some insight into the topic.
As a general rule .001 inch clearance per 1 inch shaft diameter is acceptable for sleeve type bearings.
Regards,
Dave
Attach file:
(138.80 KB) (177.29 KB) (162.59 KB) Size: 96.84 KB; Hits: 1207
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=77129