Re: '41 Aero-drive cable and knob
Posted by Dave Kenney On 2008/4/7 8:19:48
Mal, You might try here for an Overdrive knobhttp://www.yesterdaysradio.com/
Kanter also sells them.
I will have to go look under my car but I am almost certain the cable cover bolts to a frame crossmember with a C-clamp where the groove is located on the outer covering. There should not be a kink in the cable end. I will go take a photo this afternoon and post it here. I suspect that it would be the same setup on my '47 and on your 41 since they both use the R-9 version?
Attach file:
(51.94 KB)
(59.89 KB)
Kanter also sells them.
I will have to go look under my car but I am almost certain the cable cover bolts to a frame crossmember with a C-clamp where the groove is located on the outer covering. There should not be a kink in the cable end. I will go take a photo this afternoon and post it here. I suspect that it would be the same setup on my '47 and on your 41 since they both use the R-9 version?
Attach file:
(51.94 KB)
(59.89 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=6586