Re: Generator nut.
Posted by JWL On 2012/5/17 12:15:09
You could disassemble the generator and take the armature-front bearing end housing-fan-pulley assembly to an alternator/starter shop and have them remove the nut for you.
I have done this many times by carefully clamping the armature in a vise and with a proper sized socket wrench on a breaker bar removed the nut. An impact wrench might be a better tool to use. I have found that these nuts are not difficult to remove.
It does have right hand thread.
Others here may come along with more suggestions.
(o[]o)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=101533