Re: 32 900 Hinge Pin Removal

Posted by mcsilves On 2012/7/25 0:42:46

Thank you all for the info.
1) The info from Dave was very helpful, even though it was for the '33-34. I had been asked for the thread diameter of the pin, and his input helped me understand why I was being asked that question. It told me the '32 is different, in hinge pin form, hinge makeup, and number of hinges (the '32 has 3). This helped me communicate better with the mirror maker, to explain he needs a different measurement (pin diameter and length). Dave had already shared this with me in separate communication, and provided it to inform others as well (any info is always appreciated).
2) The info on the original Packard tool informed me how the dealers originally installed the accessory mirrors. The tool is obvously not available, but it was stil helpful info.
3) The info on the new tool from Eastwood was helpful. Unfortunately they are out of stock, and I have not found a replacement. I'll keep trying, or remove the hinge and use a vise (not my preferred method).
So all info is helpful to us car nuts. Thank you all for your time and effort to respond, it all helped me understand my specific application better. Sorry if this caused any ruffled feathers.