Re: Todds 1930 733 7P Sedan

Posted by tfee On 2012/5/3 20:12:53

Next thing on the list is moving the engine mounts and brake bits back 7" on the frame to allow the body to sit farther back on the frame. The engine mounts were first to come off and I hope to have them reattached in a few days. I ground down the rivet heads and thought I could then beat them out but just like the frame horn rivets they also required drilling. I had to lay on my back on my dirty garage floor in 89 degree heat and drill out the lower rivets and I can tell you there was some cursing involved. I will have to do more of this tomorrow and I'm not looking forward to it.

Attach file:

---

  (53.25 KB)


  (53.05 KB)