Re: Todds 1930 733 7P Sedan

Posted by tfee On 2012/10/18 14:01:47

Owen, I printed a copy of that out from one of your previous posts. It was very helpful.

The problem with my cam may be in the grind. Brian lined up the marks on the cam gear and crank and then checked the timing and found that the intake was opening at 6 degrees ATDC which is 26 degrees late. He then rotated the cam 26 degrees to bring the intake opening in to spec and found that it threw off the exhaust. The only way this can be off is if the cam was ground incorrectly. The engine would already be in my car if it weren't for this problem.

I really need to find the exhaust specs to check it for sure.