Re: Howard's 47 Custom project

Posted by HH56 On 2013/8/28 13:47:54
Kev, thanks for the link to the flat ducting. I knew that stuff was out there but couldn't find a ready retail outlet so kind of blew it off. I would like to go under dash and mount a couple of pods but there are some issues with that route as well.

I have considered some flat electrical raceway on the tunnel top or sides. Also considered running the single 1" ducts side by side. Either across the top or on the side. Both of those options are going to be about 1 1/2" added height or width so maybe 3/4 extra with padding removed -- but is not out of the running. One problem is the cutouts in the seat. Even with the padding removed, I think seat may still have to be modified to clear. The back seat will be raised to provide air flow under so not as big a deal. The front seat has a rear scallop or cutout in the metal frame to just clear the carpet. Front is wider but shallow. Those I think will be a problem.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=130311