Re: The Duchess Project: 1940 Super 8 Convertible Sedan
Posted by HH56 On 2014/2/26 12:21:05
The governor unscrews. Packard had a special stubby wrench but if you have the top access off, perhaps a regular length will work. Believe the size is 1 7/16" but it has to be thin -- believe the limit is around 3/8" or less in thickness.
Later wrenches which could also work on the prewars were the same size but had the handle bent to clear the cross brace.
Attach file:
(15.74 KB)
Later wrenches which could also work on the prewars were the same size but had the handle bent to clear the cross brace.
Attach file:
(15.74 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=140176