Re: Mike's 53 Clipper
Posted by Tobs On 2014/3/6 7:09:46
OK, made my list of the connectors I will be needing, and came to a total of about 40bucks from RI wire. The two things that I do not know if I can get new are the terminals for the flasher base and the round connector for the turn signals. See the picture for the flasher base terminals. Anybody have a source for these?
I would also like to get a new "round cinch 1 inch diameter 6 pole female connector" for the connector that attaches turn signals to the steering column. I opened mine up, and the wires are crimped and soldered on there. If I can get a new one, I think it will be cleaner than taking apart the old one and re-using.
One more question, is there a trick to pulling wires out of the wade connectors? Some come out easily, and others the terminal is stuck in there so good. When I got the terminal out, the two little spring/contacts in the connector also came out. grrr.
Attach file:
(152.99 KB)
I would also like to get a new "round cinch 1 inch diameter 6 pole female connector" for the connector that attaches turn signals to the steering column. I opened mine up, and the wires are crimped and soldered on there. If I can get a new one, I think it will be cleaner than taking apart the old one and re-using.
One more question, is there a trick to pulling wires out of the wade connectors? Some come out easily, and others the terminal is stuck in there so good. When I got the terminal out, the two little spring/contacts in the connector also came out. grrr.
Attach file:
(152.99 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=140558