Re: BigKev's 1954 Packard Clipper Deluxe Sedan

Posted by BigKev On 2014/5/6 15:35:07

Howard, I did media blast that bolt and hardware when I did the brakes, but will i wil recheck to make sure the vent is clear when I get up under the car. I do remember that one of the rear backing plates had significant grease build up from a leaking seal when I initially tore the rear brakes down. I did replace the seals, so perhaps that axle had a rough spot or something that is eating seals. I will check it all out. Luckily if needed, i have a set of spare axles.