Re: Clemens's 47 Custom Super Clipper
Posted by Clemens On 2014/8/27 13:13:02
It has some nastier stuff:
The trunk of my clipper was wet. Very wet and the floor covering under the carpet was rotting and literally falling apart.
So I scratched it off and let the bare metal dry. On the right hand side there was a long hole starting from the rear inner wing to the last body mount. I cut it out until I reached rust free metal.
Next step: Rust priming solution for the floor:
Fabricating first new panel for the cut out area:
Fixing the panel with some spots:
To be continued ...
The trunk of my clipper was wet. Very wet and the floor covering under the carpet was rotting and literally falling apart.
So I scratched it off and let the bare metal dry. On the right hand side there was a long hole starting from the rear inner wing to the last body mount. I cut it out until I reached rust free metal.
Next step: Rust priming solution for the floor:
Fabricating first new panel for the cut out area:
Fixing the panel with some spots:
To be continued ...
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=149188