Re: More Floor!

Posted by Keegan Chaput On 2008/10/24 12:47:49

HH56 - I've never had any experience with the Flexane, but it looks like all my "original" ideas have been done better by those of you who have gone before me!

The "Tuff Grip" Rhino Lining has a Shore Hardness of about 80 and a tensile strength of 1100-1300 psi, so pretty similar in that respect. As for cost, I've calculated that it costs me about $4 an inch when molded in the 2"id PVC. So if I'm cutting 1/2" sections for bushings they're about $2 apiece. If memory serves, Steele wanted $7-$14 each for theirs.

Cli55er- You can't buy Rhino Lining as a consumer in it's raw chemical form. It's only sold to dealers in 55 gallon drums and then it has to be pumped in the correct ratio through a machine and manifold so it mixes quickly before it hardens. It looks as though HH56 has the right idea for a DIY home based creation with the Flexane. I got your PM and I'll try to get a sample of it out to you today. Let me know what you think of it.