Re: Randy Berger's 1956 Caribbean
Posted by Randy Berger On 2008/11/4 1:32:12
This is a picture of the original divisor bar. There are three holes to be drilled and two sections cut away. I found it easier to drill the holes before I cut away the sides. Where there had been two rivets holding the divisor bar to the frame, I chose to tap (10-32) those holes for some special undercut screws. I also used these screws at the bottom of the divisor bar where there had been two rivets
Attach file:
(105.38 KB)![23_490fec2f78f8a.jpg 1280X960 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/23_490fec2f78f8a.jpg)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=15765