Re: Randy Berger's 1956 Caribbean
Posted by Randy Berger On 2008/11/4 1:47:26
All that's left is to install the vent window glass itself. Install the tensioner in the small area in the bottom of the frame and position the glass frame stub into the bottom hole in the weatherstrip. The notch in the washer with a point goes to the rear.
That Phillips head screw adjusts the tension on the vent window so that it will stay in position where you put it. Adjust this now so you don't have to remove the door panel to gain access to it.
Attach file:
(131.50 KB)
That Phillips head screw adjusts the tension on the vent window so that it will stay in position where you put it. Adjust this now so you don't have to remove the door panel to gain access to it.
Attach file:
(131.50 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=15773