Re: Stewart's 1955 Packard 400

Posted by Stewart Ballard On 2016/1/25 19:56:05

Your 12 volt electrical knowledge sure exceeds mine but I'll bet you already figured that out.

I had no idea there was an input and output specific side on these Solenoids.

I looked up the specs and they made no mention of that nor is it marked on the solenoid itself.

The Specs are below

Description Intermittent Duty Solenoid
Special applications Universal
Insulated/Grounded Insulated
NO/NC normally open
Circuitry SPST
Contacts copper
Housing phenolic
Voltage rating 12V
Maximum current: make 750A
Maximum current: break 100A
Intermittent time 10 sec. On - 20 min. Off

I will see what I can do tomorrow night.