Re: Stewart's 1955 Packard 400

Posted by Stewart Ballard On 2016/1/29 11:07:41

Thanks for confirming that.
I though the rubber coated model that I purchased (24071) was the same as the 24046 but now we know 24077 is actually the correct rubber coated model. I purchased two of those light night from Ebay.

I drilled out the rivets on my 56 Control box and posted about that last month. I should be pics of it on page 35 or 36. I put if back together with nuts and bolts. so its easy to remove.

I will wait until the solenoids arrive and tested before I make any more purchases.

Going to start working on getting the steering back in place.