Re: PTV's 1951 Packard 200

Posted by John On 2016/6/23 18:43:01

That was another question I was wondering about was about an orifice. The "T" has one to each side and one straight thru. The straight thru hole is the largest where the sending unit screws into. The other 2 holes are smaller and both the same size. Should the hole feeding to the lifters have a larger hole than the one to the oil filter?
It looks like the lines would all be made from 1/4" brake line?
John

Attach file:

---

  (32.13 KB)