Re: Henry's 55 Constellation
Posted by HH56 On 2008/12/14 19:15:26
Quote:
You've apparently got a fairly well machined rear end--hence only one side needed shimming--although since you removed the axles and disassembled it, while I wouldn't think it changed, it might be wise to make a tool sort of like the one shown and re-check when back together.
Attach file:
(64.91 KB)
the only thing i can't figure out is why there whey those shim plates on driver's side axle and not on the passengers.....is that some kind of placement thing for how far the axle goes in?? any suggestions there?? i have marked the order they came off so i know how to put them back. one of the shims is think the other is wafer thin.
You've apparently got a fairly well machined rear end--hence only one side needed shimming--although since you removed the axles and disassembled it, while I wouldn't think it changed, it might be wise to make a tool sort of like the one shown and re-check when back together.
Attach file:
(64.91 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=17905