Re: Henry's 37 Limousine

Posted by Cli55er On 2017/1/1 13:46:30

put in some of the smaller things on the motor. finished up the transmission with the new rear seal and buttoned things up.

proceeded with painting the flywheel black and coloring the markings white, along with the needle pointer on the bell housing.

new pilot bearing installed.

felt installed in lower pan cover. Max Merritt kit had this felt included, the Kanter did not. Having both kits was not the best move financially, but did yield to using the best parts from each kit.

Max Merritt throw out dust cover was too small to fit over the arm. had to cut fringes to make the hole bigger to fit.

trans mounted to motor.

DAF came by on Friday and we had some fun playing Packard. The water pump was of great interest and good thing as he noticed a hole in the casting that led to one of the bolt holes. I will be welding that back up or maybe just some metal epoxy shoved in the hole.

Attach file:

---

  (40.39 KB)


  (36.82 KB)


  (31.58 KB)


  (31.11 KB)


  (28.44 KB)


  (38.02 KB)


  (23.00 KB)


  (42.86 KB)


  (40.10 KB)


  (41.10 KB)


  (39.72 KB)


  (46.05 KB)


  (42.83 KB)


  (15.93 KB)


  (16.59 KB)


  (32.98 KB)


  (35.60 KB)


  (23.00 KB)


  (30.07 KB)


  (27.41 KB)


  (41.17 KB)


  (25.20 KB)