Re: Henry's 37 Limousine

Posted by HH56 On 2017/2/7 13:20:00

It could be that the slide doesn't make the circuit in position 3 so just check the terminal for position 4. Looking at the schematic there is one more terminal on those headlight switches than later switches had. If that extra terminal is hot with position 3 then the schematic won't work but if it doesn't come on until 4 is selected then you could use the headlight sw for both lights.

You do bring up a point though. If you have to be careful not to overshoot then you could run the fog lights by accidentally pulling out too far. In that case a separate on off switch might be desirable -- or at least an indicator light that would let you know fogs were on.