Re: RIk's 56 ultramatic

Posted by R H On 2017/3/18 23:21:02

Stuck in reverse

Something with sector or fingers. L to R gets stuck.

So pulling trans. Cause you have to remove alot to get motor off.

So this will let me see how trans is doing. Add Oki hole. Add extra plate in high range.

And put in melling oil pump.

My adapter..

And melling pump where bolt goes was not machined flat. See where lock washer was touching one side. So I milled it flat.

Using 25 thou shim. Not shim stock..to seal over bolts.

Still need to make shaft.

Attach file:

---

  (293.51 KB)


  (222.30 KB)


  (272.54 KB)


  (236.02 KB)


  (227.35 KB)


  (221.74 KB)


  (273.82 KB)