Re: Henry's 37 Limousine
Posted by Cli55er On 2017/4/6 17:30:39
front windshield moulding completed. I think it really makes that dash stand out. just one more to do for now. hopefully that divider window moulding works out and i'll wrap it too.
also fighting a miss on cylinder 1. clean the spark plug off and it works fine. I guess the spark plug keeps fouling. it is covered in solid black when I pull it to clean it.
when I pull the spark plug wire to see if the cylinders are hitting....every cylinder is good except number 1. when I pull the plug I hear the snapping of the arch, but it does not change the sound of the motor. I clean the spark plug and do the test again and the motor will bog and change. it seem to be hit or miss, so the plug must be getting fouled over time.
Attach file:
(28.62 KB)
also fighting a miss on cylinder 1. clean the spark plug off and it works fine. I guess the spark plug keeps fouling. it is covered in solid black when I pull it to clean it.
when I pull the spark plug wire to see if the cylinders are hitting....every cylinder is good except number 1. when I pull the plug I hear the snapping of the arch, but it does not change the sound of the motor. I clean the spark plug and do the test again and the motor will bog and change. it seem to be hit or miss, so the plug must be getting fouled over time.
Attach file:
(28.62 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=190103