Re: Henry's 55 Constellation
Posted by HH56 On 2009/1/1 12:52:26
OK, here is one possible way of raising load arm in the most visual quick & dirty & without hiring a professional way I can make it.
Hopefully some others will chime in and point out any flaws in my logic or come up with better solutions before you try anything. Whatever you do, orient things so you are well out of the way--no matter which method anyone comes up with--and use strong materials.
You might use padding under chain to keep from messing the paint too much & when you do get it raised, suggest chain instead of straps to hold things.
Attach file:
(114.96 KB)
Hopefully some others will chime in and point out any flaws in my logic or come up with better solutions before you try anything. Whatever you do, orient things so you are well out of the way--no matter which method anyone comes up with--and use strong materials.
You might use padding under chain to keep from messing the paint too much & when you do get it raised, suggest chain instead of straps to hold things.
Attach file:
(114.96 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=19144