Re: BigKev's 1954 Packard Clipper Deluxe Sedan
Posted by BigKev On 2009/1/2 19:08:28
Well I pulled the cursed pump off and have it set aside until I figure out where it is going to be send to for rebuild.
With that portion of the car on pause, I decided to move on to other tasks. So I decided to make up a new set of ignition wires. I had bought 1/2 spool of Packard 440 wire about a year ago off of ebay, and decided that would be a good indoor project. So I can on my couch in the warm house and cut the wire to the correct lengths, and crimped on new ends with fresh boots.
Attach file:
(78.80 KB)
With that portion of the car on pause, I decided to move on to other tasks. So I decided to make up a new set of ignition wires. I had bought 1/2 spool of Packard 440 wire about a year ago off of ebay, and decided that would be a good indoor project. So I can on my couch in the warm house and cut the wire to the correct lengths, and crimped on new ends with fresh boots.
Attach file:
(78.80 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=19207