Re: 1941 Packard Clipper Eight Special Sedanhttps://packardinfo.com/xoops/html/images/subject/icon5.g

Posted by Howard Wade On 2017/6/16 1:27:02

Well, i have made up the wiring loom from front to back and installed it where it should go. I have also fitted one of the tail lights, I was a bit disappointed with the quality of the rubber gasket the fit was not really very good, and because I am here in the UK its just to much trouble to send back to the US. I have also fitted the number plate light and got wiring in for that. The fuel tank wires are also in. I have also fitted the floor heater and also fitted the underlay sound proofing on the floor, i have to cut out where the seat bolts to. I have got to order the rubber water hose for the under floor heater. I have also got the rear window glass cleaned up nice and fitted that it went in really well apart from where the join is, its a bit off centre so i will pop the window out again and centre the join up. I have also got the headlight bowls painted and fitted. I am just waiting on some heat shrink so i can start soldering all the eyes onto the wiring loom and start wiring up. I am also waiting for the temp gauge to come back from the reapairers then i can get the Dash board put back together and installed. Well thats about it on the update for now. Are post some more pics shortly.