Well now that I am finally back at home after almost 2 weeks on the road, I was finally able to get some work done on the '54.
First I alternator mounted on it's new bracket and also bolted the ground strap the the same bracket.
Also I pulled the valve covers to inspect everything. Everything looks good. When I pulled the oil pan last summer I had found 4 value keepers in the down in the muck. So I was worried I might have had a couple free values. But as you can see everything appears to fine. I guess the last time the valves were worked on, someone must have dropped a few keepers. I also rotate the crankshaft and verified that all the values are free and nothing is sticking. Fresh gaskets and a little gasket sealer, and I buttoned the covers back up.
I also started to reinstall the engine accessories back on to the engine. The transcooler was reinstalled, as was the fuel pump. You can see that the top hose has two different style hose clamps on it. This is acutally correct. All the hoses use spring-style wire clamps, except the hose end that hooks to the water pump. It uses a screw-style wire clamp. This is called for in the PI engine judging guide, and also there are a couple of pictures in some some of the service manuals that verify this.
Attach file:
(44.28 KB)![1_46ad5a56dbe9a.jpg 800X600 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/1_46ad5a56dbe9a.jpg)
(49.20 KB)![1_46ad5a6588fa5.jpg 800X600 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/1_46ad5a6588fa5.jpg)
(49.86 KB)![1_46ad5a7490606.jpg 800X600 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/1_46ad5a7490606.jpg)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=1931